Hardwood flooring is known to add elegance, warmth, beauty and value to your home if you keep them well-maintained. But even when you are taking good care of them, accidental scratches, and wear and tear still happens. You might be wondering, “can I get scratch-resistant hardwood flooring in stores near me?” This is probably the reason that oil finished wood floors are rising in popularity on the hardwood flooring trends for 2019, as the scratches on them are easier to fix. However, if your pre-existing hardwood floor already has suffered some damage there are certain things you can do to remove these scratches.
Removing the Scratches from Your Wooden Floor
Your solid hardwood flooring needs a finish to protect these timeless flooring ideas from daily wear and tear. So, in order to maintain its beauty, you need to know what type of finish has been used on them if it is not an unfinished hardwood. If the old finish has been damaged, sanding and refinishing can repair it but that is a very intensive procedure. Hardwood flooring prices and the cost for a complete floor refinish is pretty high too. For the less severe damage, you can reduce the effects and sometimes even remove the scratch marks and discolouration completely with the following repair tips.
1. Clean Gently
Your old and dull hardwood flooring only amplifies the scratch marks. Along with that, dirt particles can get mixed with the floor to make the condition even worse. In this situation, gentle but thorough cleaning of the floor is the primary course of action you can take. Steer clear of using any brooms and/or abrasive material, and avoid soaking the floor with any type of liquid cleaner or even water. Use a mop or vacuum instead and gently remove all the dust, hair or any other loose dirt and debris.
This method works best for light surface scratches.
- Use a soft cloth and a hardwood floor cleaner. You can also make one by adding just two to four drops of liquid soap to 1/4th of water and put the mixture in a spray bottle. Spray it on your polyurethane-finished floor, and then wipe it with a microfibre mop.
- The next thing to do is to spray some water on the damaged floor, or simply wipe it with a soft and water-damped cloth.
- You can even use some water-based cleaning agent as they are safe for your polyurethane-finished floors.
- After all the wiping and buffing, let the damaged area dry.
- After that, apply a new layer of protective coating which can be either a sealant or any other kind of varnish.
- Let the area dry for overnight and your floor is going to be good as new.
2. Use Fine-Grained Sandpaper
The best way to bring life back to your lacklustre wood floors is through thorough cleaning and polishing.
- Use grained sandpaper to scrape off the damage. Remember to always scuff in the direction of the grain and not against it.
- In this method, you will need to reapply stain on the area so make sure that it is hidden under furniture while being repaired.
- Before you reapply any stain, test it first. While water-based urethane finish dries faster, it does create too much contrast between the old floor and the repaired new area.
- Oil-based urethanes, in contrast, have a strong odour, even though they leave a yellow tint on the floor, that darkens with time and helps in matching the colour of the repaired area with the rest of the floor.
- Just make sure that you have sanded the floor thoroughly and made it even before applying any stain.
3. Use Walnut
This is an inexpensive way to replenish the rich colour of your wooden floor sans any signs of wear and tear. Walnuts have great moisturizing qualities and the brown dye in them repairs and accentuate any worn-out wood.
- First, crack the shell of a walnut open and scoop out the fleshy part. One walnut has enough moisturizer for one scratch so you do not need too many.
- Warm up the oil of the nut separately and then apply it on the freshly sanded floor.
- Another way is to simply rub the meaty part of the nut back and forth in the direction of the wood grains and then rubbing your finger over the spot to warm up the wood.
- Let the walnut oil stay on the wood for at least a few minutes and then polish it with a soft piece of cloth.
- The oil will form a protective layer over the scratched area and fill the pores and darken it for a great looking finish.
4. Utilize Ingredients from the Storeroom
You can even use regular household ingredients from the storeroom to remove scratch marks from your hardwood floor.
- Thoroughly vacuum your floor to remove all traces of dust and dirt first.
- Then, apply a combination of baking soda and olive oil on the scratched area. Do not apply too much olive oil, but just enough to get the baking soda moist.
- Wait for a few minutes and polish the area gently with a soft cloth or sponge.
- Clean it with a damp cloth and then let it dry.
5. Apply Wood Stain
Minimizing the scratches on your hardwood floor can get complicated if they are too deep. This type of damage will require more time and effort to remove them. Apply some wood stain to reduce the marks. You can get these stains in oil-based, water-based and combined form.
While oil-based stains take the longest to dry, they also provide the best finish that lasts the longest.
- Water-based stains, in contrast, are easily applicable and cleaning them up is easy too. They come in a number of shades as well.
- Of course, gel-based stains do not penetrate the surface and is perfect for all types of materials, even pre-finished wood.
- After you are done choosing the right wood stain, let the liquid colour fill in the scratched areas completely.
- There are stain markers and blending pencils available too, but you may have to experiment with a few colour combinations before you end up with the right colour tone.
The best advice would be to keep your hardwood flooring as safe as possible so that they do not get any scratches on them in the first place. Keep your hardwood flooring clean with some cleaners at a regular interval because even the dirt accumulating on the floor can cause scratches that will ruin the beauty of your product. However, with these tips, you can be certain to remove any scratches from your solid hardwood flooring at a minimal cost.