What You Need to Know Before Installing Sheet Vinyl Flooring

If the flooring trends for 2019 are anything to be believed, then the popularity of sheet vinyl flooring is definitely on the rise. And for good reason too. More and more homeowners are looking for these particular types of flooring in retail stores, and want to know how to lay sheet vinyl flooring in their bathroom and/or kitchen. The vinyl sheets available in the market today, are as durable as attractive and are suitable for any type of home décor. Other reasons for it being sought after by a great number of homeowners are the superior water resistance of this product, along with its low level of allergen emission.

Installation Tips for Sheet Vinyl Flooring

The water-resistant quality of vinyl is the reason most homeowners prefer it for the wet areas of the home. But how beneficial these flooring types will be in the long run depends a lot on the installation process and the preparation before that.

In this post, we will discuss the entire process of laying sheet vinyl flooring and what is needed to be done before and after the project to get great looking high-quality floors so you can avoid any installation mistakes.

Tools and Materials

Here is a list of the different tools and materials you will require to successfully finish the project of installing vinyl sheet flooring.

Sheet Vinyl - Flooring Installation in Toronto


  • Sheet vinyl
  • Adhesive


  • Utility knife
  • Measuring tape
  • A straight edge bar, used for measuring if something is straight
  • A small, flat iron bar similar in function as a crowbar, called pry bar
  • A trowel- a small tool with a pointed blade, used for evenly spreading the mortar
  • A 100-pound floor roller
  • A steel square, also known as the carpenter’s square
  • Washable marker and pencil

Types of Products

Sheet vinyl has a tough competition in luxury vinyl tiles, but manufacturers are constantly working to bring the latest style and designs to you. Based on the different construction of the sheets, the installation method of this super economical product differs too.

  • Felt-Backed Product

To install these, a full-spread adhesive is required. For some products, however, a perimeter bond glue is used, instead of a full-spread glue which is much less expensive and is easier to remove.

  • Traditional Fibreglass-Backed and Composite Stone-Backed Products

Fibreglass-Backed Sheet Vinyl – Flooring Installers in Toronto

A relatively more modern take on the felt-backed vinyl sheet, the fibreglass-backed vinyl has taken over the market in the past decade. If you have the option of choosing a modified loose-lay or a full-spread glue, which can be permanent or releasable pressure sensitive adhesive.

The type of the sheet vinyl floor you choose determines the variety of surfaces it can be installed upon. For example, you can either install vinyl flooring on an approved grade of plywood, or you may be interested in installing vinyl flooring over your pre-existing old vinyl flooring. Whichever option it is you desire; you need to first decide which type of sheet vinyl flooring product you want to install.

Pro Tip: Even though vinyl flooring is suitable for most parts of your home, you need to make sure that the surface is flat-levelled. These flooring products are not at all suitable for the stairs.

Preparing the Room

Now that you have chosen some particular style and type of vinyl sheet flooring, it is time to focus on the installation procedure. But before you can even begin, you need to prepare the area of your room for the installation.

  1. Firstly, remove all furniture, appliances, and toilet (if you are installing vinyl flooring around a toilet).
  2. Unhinge the doors.
  3. In the third step, use the pry bar to remove the flooring trim and mouldings. The trim is a compulsory component of the design and installation that often is ignored. Both the trim and the moulding are functional as well as decorative pieces, for all types of flooring, be it hardwood, laminate, engineered hardwood, sheet vinyl flooring or luxury vinyl tile floor.
  4. Simply insert the pry bar between the floor trim and the wall, and then put a small wood block behind it. The wood block is meant to protect the wall from any harm during the process.
  5. Lastly, take the nails off from the wall with the help of pliers. In case the nails are embedded in the moulding, and you intend to use the same flooring trim again, then just pull the nails from through the back to stop splitting.

Preparing the Floors

As mentioned earlier, various types of sheet vinyl flooring can be installed on different types of surfaces. Depending on which surface you choose, the preparation for the installation varies too.

  • Concrete

Given that the surface of the concrete is clean, smooth and dry, you can get sheet vinyl flooring installed over it. Just make sure that all the holes and cracks of the surface have been repaired before you begin the process. To lower high spots, use a grinder and for any minor bumps, use a masonry chisel and a small sledgehammer to remove them.

  • Linoleum or Vinyl Flooring

If you plan on installing sheet vinyl flooring over old linoleum or vinyl flooring, only if your pre-existing floor, then it needs to be in a decent condition. To prepare this type of floor, use a coating of an embossing leveller to improve the rough texture of the old floor and fix the dents. This is a compound which is similar to a mortar in appearance and is perfect for installing a new floor.  The embossing leveller also functions as an underlayment in case of new floor installations.

  • Floors in Need of Underlayment

For hardwood and some other types of flooring, you to find the best underlayment for sheet vinyl flooring to work. With time, the different indentations tend to appear more frequently on your floor. As a result, the new floor obtains the flawed texture of the floor, if not fixed before the installation. If complete removal of the old floor is not a feasible solution or the area with the rough texture is too damaged, even for the embossed leveller to work, then you simply get a plywood underlayment to cover it.

Here are the few preparations you need to take before you can opt for installing sheet vinyl flooring in your home. However, it is important to remember, that the sheet rolls, when combined, can be a bulky material, and cutting them with precision and installing them require a lot of professional skill. Therefore, avoid the temptation of doing it yourself, and contact some experts who deal with sheet vinyl flooring installations on a daily basis to get the best advice.